搜索结果: 1-15 共查到“机械工程 Quality”相关记录20条 . 查询时间(0.265 秒)
Quality Evaluation of Diffusion Bonded Joints by Electrical Resistance Measuring and Microscopic Fatigue Testing
diffusion bonded joints interfacial failure electrical resistance
2011/8/4
Micro-structure related behavior of diffusion bonding joints is a crucial issue in device and reactor fabrication of Micro Chemo Mechanical Systems. However, the previous studies have been focused on ...
Effect of flash butt welding parameters on weld quality of mooring chain
Welding Mooring chain Flash butt welding
2009/12/3
Purpose: The effects of flash butt welding parameters on mechanical properties were explored for mooring chain for offshore structure.
Design/methodology/approach: Through the tensile strength, impac...
Expectation of the parts quality on the ground the simulation of the injection moulding process
Institute of Polymers Processing and Production Managements, Czestochowa University of Technology
2009/12/2
Purpose: The aim of this paper was to present results of researches concerned to predestining quality of polymer parts created by injection moulding method. The estimation of structural solution quali...
A quality problem in seam welds in aluminum extrusion
Metallic alloys Seam weld Aluminum Extrusion Porthole die
2009/12/1
Purpose: Seam welds occur during the hollow profile extrusion; the billet’s material is divided into separate
metal streams by the bridges of the die which support a mandrel, and then these metal str...
Enterprise’s evaluation according to the Polish Quality Award’s criteria
Quality management Quality improvement The Quality Awards
2010/1/19
Purpose: The purpose of the study is to describe the activities in the self-evaluation process of the investigated firm on the example of The Polish Quality Award model.
Design/methodology/approach: ...
Study of the milling strategy on the tool life and the surface quality for knee prostheses
Machining strategy Tool life Surface quality
2010/1/19
Purpose: The aim of this research is to make a study about the influence of the tool trajectory’s generation on
its tool life and the improvement of the surface quality in multi-axis milling at high ...
Quality control for the continuous casting process using electromagnetic transducers
Continuous casting process Electromagnetic transducers Solidification point
2010/1/20
Purpose: The continuous casting process is controlled automatically because various sensors and control units
are connected to the mold and lower tundish roll. The solidification point in the process...
Quality control in the process of rings of train wheels manufacturing
Manufacturing and processing Quality assessment
2010/1/20
Purpose: The paper presents an example of the application of the complex quality control process
and shows the advantages of such approach. Moreover it presents the analysis of a specific manufacturi...
Purpose: The paper presents the results of investigations of new methods that could be utilized in a technical
project management. These methods base on the classical quality tools which have been mo...
Methodology of the quality management in the productive process
Quality management Quality control Process
2010/2/4
Purpose: The quality management in the productive processes is essential in formation of the quality of the final product. It is particularly important in the motor industry. The paper presents charac...
The modern quality control of preproduction sphere in a company
Quality management Product modernity Averaging Quality Rating method
2010/2/4
Purpose: A new approach for quality control and improvement of preproduction sphere in organization with usage of chosen quality research methods has been presented.
Design/methodology/approach: The ...
Analysis of quality and cost of FeSiMg treatment master alloy vs cored wire in production of ductile cast iron
Ductile cast iron Vermicular cast iron PE Method
2011/3/15
The results of studies on the use of FeSi5%Mg magnesium alloy in modern cored wire injection method for production of nodular and vermicular graphite cast irons were described. The injection of Mg cor...
Quality tools – systematic use in process industry
Quality management Quality tools Process industry
2010/2/9
Purpose: The paper is dealing with one segment of broader research of universality systematicness in application of seven basic quality tools (7QC tools). The research was carried out in different are...
Multi-criterion analysis technique in a process of quality management
Quality Management Multi-criterion analysis technique
2010/2/9
Purpose: The aim of this paper is to present the critical analysis of some multi-criteria techniques applied in the area of quality management. It is strongly stated that some solutions in this scient...
Purpose: The purpose of the study was to present a view of problems of quality management in university education and to indicate the validity of applied methods verified and used in the productive in...