搜索结果: 1-15 共查到“材料科学 high temperature”相关记录17条 . 查询时间(0.113 秒)
Engineer patents waterlike polymer to create high-temperature ceramics
Engineer patents waterlike polymer high-temperature ceramics
2017/4/27
Ceramic textiles, improved jet engine blades, 3-D printed ceramics and better batteries may soon become a reality, thanks to a recently patented polymer from a Kansas State University engineer.Using f...
2017年高温腐蚀高登研究研讨会（The Gordon Research Seminar on High Temperature Corrosion）
2017年 高温腐蚀高登 研讨会
2017/3/7
Applications for this meeting must be submitted by June 10, 2017. Please apply early, as some meetings become oversubscribed (full) before this deadline. If the meeting is oversubscribed, it will be s...
The investigations of hot-deformability and structure of high-temperature Fe–Ni alloy
Metallic alloys Hot deformation Recrystallization
2009/12/3
Purpose: This study describes the influence of initial austenite grain size and parameters of hot plastic deformation on the deformability and structure of high-temperature Fe–Ni austenitic alloy of A...
Microstructure and mechanical properties of high temperature creep resisting superalloy René 77 modified CoAl2O4
Alloys Nickel superalloys Grain refinement
2009/12/1
Purpose: Nickel based superalloys are widely used for turbine and stator blades of compressor in aero-engines.
The objective of this work is to determine the influence of the inoculant’s content (co...
Structure and precipitation strengthening in a high-temperature Fe–Ni alloy
Metallic alloys Heat treatment Structure
2009/12/1
Purpose: The relationships between the kinetics of precipitation and growth of the intermetallic phase
γ’ [Ni3(Al,Ti)] and the strengthening magnitude obtained in a high-temperature Fe–Ni alloy of th...
Microstructure evolution of CP titanium during high temperature deformation
Superplastic materials Titanium Dynamic recrystallization Electron Back Scattered Diffraction
2009/12/1
Purpose: To investigate the superplasticity of commercially pure titanium alloy and microstructure evolution of
the alloy during high temperature deformation.
Design/methodology/approach: Uniaxial t...
Water vapor effect on high-temperature oxidation behavior of Fe3Al intermetallics
intermetallic compounds iron aluminides water vapor
2010/1/19
Fe3Al intermetallics (Fe3Al, Fe3Al-Zr, Fe3Al-Zr,Mo and Fe3Al-Zr,Mo,Nb) were oxidized at 950 °C in dry and humid (11 vol% water) synthetic air. Thermogravimetric measurements showed that the oxidation ...
Properties of Gold-Nickel Alloy Brazed Joints in High Temperature Materials
Properties Gold-Nickel Alloy
2009/7/30
Properties of Gold-Nickel Alloy Brazed Joints in High Temperature Materials.
Investigations of high-temperature corrosion of Cr-Ni cast steel
Fe-Cr-Ni alloys Oxidation High temperature corrosion Oxidation kinetic Scale
2011/4/1
Austenitic cast steels of Cr25-Ni32-Nb grade have found wide application in chemical and petrochemical industries. This study discusses the problem of the kinetics of oxidation of these materials in ...
Aluminide protective coatings on high-temperature creep resistant cast steel
Anticarburizing protective coatings Pack cementation Cast method Paste method Slurry method Thermal shocks
2011/4/1
This paper presents the results of research on aluminide protective coatings manufactured on high–temperature creep resistant cast steel.The main purpose of these coatings is protection against the hi...
Study of flow fractionation characteristics of magnetic chromatography utilizing high-temperature superconducting bulk magnet
magnetic chromatography field flow fractionation HTS bulk magnet
2010/1/18
We present numerical simulation of separating magnetic particles with different magnetic susceptibilities by magnetic chromatography using a high-temperature superconducting bulk magnet. The transient...
High-temperature resistivity and thermoelectric properties of coupled substituted Ca3Co2O6
Seebeck coefficient resistivity x-ray diffraction
2010/1/19
Polycrystalline samples of Ca3−xNaxCo2−xMnxO6 (x=0.0–0.5) have been prepared by the sol-gel cum combustion method using sucrose in order to investigate the effects of the coupled substitut...
Analysis of the precipitation and growth processes in a high-temperature Fe–Ni alloy
Metallic alloys Heat treatment Precipitation and coagulation
2010/1/19
Purpose: The influence of prolonged aging on the precipitation process of the intermetallic phases, carbide
and boride in high-temperature Fe–Ni austenitic alloy has been studied. Taking advantage of...
3D physical modeling of anisotropic grain growth at high temperature in local strong magnetic force field
diffusion annealing ferromagnetic anisotropy magneto science
2010/10/12
A new mechanism based on the effect of local magnetic forces on diffusing ions around a
growing ferromagnetic precipitate is proposed. A 3D simulation based only on physical
parameters is undertaken...
Effect of high temperature deformation on the structure of Ni based superalloy
Metallic alloys Working properties of materials and products Plastic forming
2010/2/8
Purpose: A study on the hot deformation behaviour and dynamic structural processes (dynamic precipitation operating during deformation at elevated temperatures) of nickel based superalloy was presente...